How to Adjust the Power-On Speed Setting

On the OAS Air Pro, the default power-on speed is set to S3.

If you feel the startup speed is too fast, you can lower the default speed by following the steps below. This allows the wheelchair to start at a slower and more comfortable speed each time it is turned on.

---

⚙️ How to Adjust Power-On Speed

1️⃣ Enter Speed Setting Mode

• Make sure the wheelchair is powered OFF
• Press and hold both the “+” button and the Power button at the same time
• The screen will turn on and a beep will sound
• The display will show F1, indicating settings mode

---

2️⃣ Select Speed Setting Menu

• Press the Horn button to cycle through settings
• Continue until you reach F7, which displays 006 (memory save interface)

---

3️⃣ Adjust Speed Level

• Use the “+” or “–” buttons to adjust the speed setting
• Example:
  • Set to 002 = lower startup speed (Speed Level 2)
  • Higher numbers = faster startup speed

---

4️⃣ Save the Setting

• Press the Power button once to save
• The battery icon will flash rapidly, confirming the setting is saved
• Press the Power button again to turn off the wheelchair

---

🔄 After Adjustment

When you turn the wheelchair back on, it will automatically start at the selected speed level.

---

🧠 Key Summary

• Default startup speed: S3
• Lower number = slower startup speed
• F1 → enter settings mode
• F7 = speed memory setting
• Power button saves changes
• New setting applies on next startup