Quick Start Guide: Unboxing & Setting Up Your OAS Air Ultra

Welcome to your OAS Air Ultra! We are so excited for you to experience the freedom, comfort, and extended range of your new chair.

To help you get moving as quickly and safely as possible, we’ve put together this simple step-by-step guide to take you from unboxing to your very first drive. 😊

📦 What’s Inside the Box?

Before we begin, let’s make sure you have everything you need. When you open the package, you will find:

• 1 × OAS Air Ultra Electric Wheelchair (95% pre-assembled for your convenience!)

• 2 × Lithium Batteries 

• 1 × Battery Charger Pack

• 1 × Comfortable Seat Cushion

• 1 × User Manual

🛠️ 8 Simple Steps to Set Up Your Air Ultra

Putting your chair together is quick and easy. Please follow these steps to complete the setup safely and correctly:

Step 1: Unbox & unfold

Carefully lift your wheelchair out of the box and gently unfold the frame fully.

Step 2: Adjust the footrests

Locate the footrests at the front of the chair and lower them into their flat, ready-to-use position.

Step 3: Install the seat cushion & controller

Place your comfortable seat cushion onto the seat base. Next, slide the joystick controller into its mounting bracket on the armrest, tighten it securely, and connect the control cable.

Step 4: Adjust the backrest

Raise and position the backrest into a comfortable, supportive upright position. Make sure it is securely positioned before use.

Step 5: Install the anti-tip wheels

Attach the safety anti-tip wheels to the rear of the frame to ensure maximum stability and peace of mind during your drives.

Step 6: Select your mode (Electric vs. Manual)

Familiarize yourself with how to switch between the two modes using the two red levers located on the motors:

• Electric Mode (Both levers UP): Push both levers upwards to engage the motors for powered driving.

• Manual Push Mode (Both levers DOWN): Push both levers downwards to disengage the motors if you or a loved one prefer to push the chair manually.

Step 7: Install the batteries

Slide the lithium batteries into the battery compartment and lock them securely into place.

Step 8: Turn on the power switch & controller

Because your Air Ultra features a dual-battery system, activating it is a simple sequence:

1. Turn ON the Batteries: Turn on the battery power switch.

2. Choose Your Active Battery: On the lower right side of the wheelchair, locate the Battery Selector Switch and choose which battery to draw power from:

   • I = Using the Right Battery

   • II = Using the Left Battery

   • O = Off (Turns the power system off)

3. Power Up the Joystick: Turn on your joystick controller—and your Air Ultra is ready to roll!

🧠 Quick Summary for a Perfect Start

• 95% Pre-assembled: Designed for a hassle-free, tool-free setup right out of the box.

• Dual Battery Setup: Includes 2 lithium batteries.

• Dual Modes: Supports both independent electric driving and manual push modes.

• Start-up Sequence: Turn on the battery power switch first ➡️ Select I or II on the selector switch ➡️ Turn on the controller.

✉️ Need Any Help?

If you run into any questions or need clarification on the dual-battery selector while setting up your Air Ultra, please don't hesitate to ask!

Please contact us directly—we are always right here to guide you through it.