Weβre here to help you get the best performance from your OAS Air Ultra π
This guide explains how to safely charge and correctly use the two-battery system.
β The battery power switch must stay ON during charging and normal use
β‘ Before You Start (Important)
Please make sure:
- The battery power switch is turned ON
- The charger is properly connected
- You understand how the battery selector switch (I / II) works
π About the Two-Battery System
The OAS Air Ultra uses two batteries:
- Right battery
- Left battery
To control which battery is being used or charged, the wheelchair has a battery selector switch.
π Battery Selector Switch:
- I = Right battery active
- II = Left battery active
- O = Off
β This switch is used for both driving and charging
β It determines which battery the system is currently using
π Method 1: Charging the Battery Separately (Battery Removed)
Use this method when the battery is taken out of the wheelchair.
Steps:
- Remove the battery from the wheelchair
- Plug the charger directly into the battery
- Connect the charger to a wall outlet
- Check the LED indicator light
Notes:
- β Battery must be removed from the wheelchair
- β Battery switch must still be ON
- π΄ Red / Orange = charging
- π’ Green = fully charged
π Method 2: Charging Through the Wheelchair (Battery Installed)
Use this method when the battery stays inside the wheelchair.
β οΈ Important Step Order
1οΈβ£ First, turn the battery power switch ON
2οΈβ£ Then select the battery selector switch:
- I = Right battery
- II = Left battery
Then:
- Plug the charger into the charging port located under the joystick controller
- Ensure the charger is fully connected
- Keep the battery installed and locked in place
- Keep the battery switch ON during the entire charging process
Notes:
- β Battery stays installed in the wheelchair
- β Selector switch determines which battery is charging
- β Charging will not work properly if switch is OFF
- π΄ Red / Orange = charging
- π’ Green = fully charged
β± Charging Time
- First full charge: 6β8 hours
- Charge until the light turns green
π§ If Charging or Driving Issues Occur
Please check:
- Battery power switch is ON
- Selector switch is correctly set to I or II
- Charger is fully connected
- Try a different wall outlet
- Battery is properly installed (for Method 2)
πΈ If the Issue Persists
Please send:
- Photo/video of charger light
- Battery position and selector switch
- Controller screen when turning on
Weβll help you resolve it quickly π§‘
π§ Key Summary
- OAS Air Ultra uses two batteries
- Selector switch controls:
- Driving battery
- Charging battery
- I = right battery / II = left battery
- Charging methods:
- Battery removed
- Battery installed (via wheelchair port)
- Battery switch must always be ON
- π’ Green light = fully charged
Comments
0 comments
Please sign in to leave a comment.